|
Product Details:
Payment & Shipping Terms:
|
| Roller Material: | 6063/6061 T6 Aluminum Alloy | Length: | Customized |
|---|---|---|---|
| Anodize: | Hard Anodize HV700 | Hardness: | 700HV |
| Anodize Thickness: | 60-90μm | Runout: | <0.04mm |
| Concentricity: | <0.04mm | Balance: | G2.5 |
| Smothness: | Ra 1.6-0.8 | HS Code: | 8443919090 |
| High Light: | Aluminum Dead Shaft Idler Roller,Deep Grooved Dead Shaft Idler Roller,6061 T6 guiding return roller |
||
Deep Grooved Aluminum Dead Shaft Idler Roller For High Speed Slitting Small Runout
Briefly Introduction
CBB Chuangbo new design new techology aluminum dead shaft idler roller is made of high quality aluminum alloy materials, and it has all kinds of modules and sizes with ribs structure and the outside diameter is from 25mm to 320mm. Under the cheat by computer balancing correction process, the dynamic balance of the aluminum roller will be small than 2g. With using of sophisticated equipment and special tools, the roll surface gloss can be 0.8, concentricity can reach to 0.02mm. Special cheated in the shaft axle of the roller, with imported bearings, the aluminum guide roller works well even at high speed.
Parameters
| Diameter | 22-320mm |
| Length | 100-6000mm |
| Anodize | HV300/HV700 |
| Thickness of anodize | 20-80μm |
| Concentricity | <0.02mm |
| Runout | <0.04mm |
| Type | Hollow / Dead shaft / Live shaft |
| Surface | Plain/ Cross line/ Center line/ Groove line |
| Smoothness | Ra6.3-0.4 |
| Balancing | G6.3/G2.5 |
| Type of roller | Hollow type |
| Dead shaft type | |
| Live shaft type | |
| Surface treatment | HV300 soft anodize |
| HV700 hard anodize | |
| HV700 hard anodize with mirror surface | |
| Teflon | |
| Surface groove | Plain |
| Cross line | |
| Center line | |
| Grooved line | |
| Anilox line | |
| Rolla line |
Features:
1) Wide application
Aluminum Dead Shaft Idler Roller as an independent accessory, can be designed from 22mm to 320mm, real size is according to clients' practical need. It can be widely used in slitting, printing, rewinding, coating, laminating, bag making, paper making machines,ect.
2) Long use time and easy to maintance
We produce high-quality aluminum dead shaft idler roller, with required surface treatment, even for screws, we only adopt high quality aluminum and steel not cheap materials in the market.
3) Light in weight
The weight of the aluminum made roller is very light compared to steel roller.
Application
Printing
Packaging plastics
Paper
Glass
Pharmaceutical
Electronics batteries
Textile machinery and industries
About CBB Chuangbo:
Ruian Chuangbo Machinery Co., Ltd. established in 1995, is located in Nanbin Street Industrial Zone, Ruian City, Zhejiang Province, China
The company is specialized in manufacturing of machinery parts, and has been granted with independent import and export rights. The company has strong development strength, advanced technology and leading manufacturing and testing equipment. Our main products include aluminum guide roller series, curved roller series, air expand shaft series, centrifugal fan series, axial fan series, torque electric motor and controller series, frequency motor series, magnetic brake / clutch and tension controller serious , pneumatic diaphragm pump serious, electric ink pump serious, low-speed permanent magnet synchronous motor serious and so on. Widely used in printing, packaging, plastics, pharmaceuticals, textiles machinery and industries.
Contact Person: Cai
Tel: 86-15558888956
Fax: 86-577-65001588
