|
Product Details:
Payment & Shipping Terms:
|
| Model NO.: | QDM-902 | Power: | Press Air |
|---|---|---|---|
| Flow: | 14L/minute | Pressure: | 0.25-0.60MPa |
| Weight: | 3.5kg | HS Code: | 8413503990 |
| High Light: | 6 meters Pneumatic Diaphragm Pump,3.5kg Pneumatic Diaphragm Pump,3.5kg electric diaphragm pump |
||
One Phase Pneumatic Diaphragm Pump Air Power QDM-902 Single Phase
Introduction
Pneumatic diaphragm pump in the pump body and gas distribution equipment have revolutionary improvements, with no dead point, high efficiency, large flow and other characteristics. Widely used in pharmaceutical, sewage treatment, food, chemical, automobile, paint and other industries. The pump is made of cast iron, aluminum alloy, 304 stainless steel, etc. The diaphragm is made of plastic and teflon.
Technical parameters
| Type | QDM-902 |
| Working pressure | 0.25-0.60 Mpa |
| Maximum Output Flow | 14L/min |
| Maximum transmission viscosity | 1000 centipoise |
| Biggest suction | 6 meters |
| Medium in and out connection threads | G1/4 inch |
| The intake connecting thread | G1/4 inch |
Principle
It takes the air as momentum which compressed by air compressor. The needle valve adjust the air flow, which drive the membrane, then the pump transport the liquid.
Features
Application
Used for coating, circulation, transmission of water-based ink printing machine, gravure printing, flexo printing and the ink on the compound machine, glue, and the liquid with particle, inflammable liquid.
Characteristic
1. Low air consumption, the medium flow regulation is stepless regulation, and it is adjusted by air inlet valve.
2. Membrane is made of corrosion resistant material, so it can be used to transport corrosive medium.
3. Low failure rate, easy to install, convenient maintenance.
4. The pump shell is made of high quality material, the inner parts are made of stainless steel and copper, all of those make the pump light, beautiful, stainless and anticorrosive.
| Name | Model | Working Pressure | Max Suction |
Max output flow |
Linking screws | State of the fluid | ||
| Ink Inlet | Ink Outlet | Air Inlet | ||||||
| One-way Pneumatic Diaphragm Pump | QDM-902 | 0.25-0.6(Mpa) | 6M | 14L | G1/4" | G1/2" G1/4" |
G1/4" | Having Pulse |
| Two-way Pneumatic Diaphragm Pump | QDM-901 | 0.12-0.8(Mpa) | 8M | 26L | G1/2" | G1/2" | G1/4" | Zero Pulse |
Why choose CBB Chuangbo
A. Reliable supplier in China
Established in 1995, CBB Chuangbo has been in machinery parts for 25 years, now we are biggest manufacturer of machinery parts in East China.
B. Hight quality material
High quality of steel shell for the brake and imported powder for longer life of the brake.
C. Cooling treatment
Insider there is a small cooling fan inside the brake, cooling the tempreture and make the brake stable.
D. Quality control
We have the quality control system during the whole production fromthe very beginning to the end and our principle is to make sure each shaft is qualified.
