Payment & Shipping Terms:
|Model NO.:||QDM-902||Power:||Press Air|
|Ink Output:||G1/4"||Ink Input:||G1/4"|
G1/4" Pneumatic Diaphragm Pump,
QDM902 Pneumatic Diaphragm Pump,
G1/4" electric diaphragm pump
QDM902 Single Phase Pneumatic Diaphragm Pump For Mix Ink For Printing Machine
Pneumatic diaphragm pump is a new type of conveying machinery. Its power supply is compressed air. It can take out various corrosive liquid with particles, liquid with high viscosity, volatile, poisonous. It is suitable for water-based ink printing, four plate printing machine, flexo and glue laminating machine, with liquid with particles, and the cycle of various flammable liquid delivery system. It can take out various corrosive liquid with particles, liquid with high viscosity, volatile, poisonous. Widely used in pharmaceutical, sewage treatment, food, chemical, automobile, paint and other industries.
|Working pressure||0.25-0.60 Mpa|
|Maximum Output Flow||14L/min|
|Maximum transmission viscosity||1000 centipoise|
|Biggest suction||6 meters|
|Medium in and out connection threads||G1/4 inch|
|The intake connecting thread||G1/4 inch|
|Linking screws||State of the fluid|
|Ink Inlet||Ink Outlet||Air Inlet|
|One-way Pneumatic Diaphragm Pump||QDM-902||0.25-0.6(Mpa)||6M||14L||G1/4"||G1/2"
|Two-way Pneumatic Diaphragm Pump||QDM-901||0.12-0.8(Mpa)||8M||26L||G1/2"||G1/2"||G1/4"||Zero
It takes the air as momentum which compressed by air compressor. The needle valve adjust the air flow, which drive the membrane, then the pump transport the liquid.
The scope of application
Chemical industry producing printing ink(water-based, oily) solvent, ethanol, tuluol, acetone, dope and so on
Other industry need the safe pneumatic pump.
1. Low air consumption, the medium flow regulation is stepless regulation, and it is adjusted by air inlet valve.
2. Membrane is made of corrosion resistant material, so it can be used to transport corrosive medium.
3. Low failure rate, easy to install, convenient maintenance.
4. The pump shell is made of high quality material, the inner parts are made of stainless steel and copper, all of those make the pump light, beautiful, stainless and anticorrosive.
Contact Person: Cai